Nortel Networks 8683POS Uživatelský manuál stáhnout pdf (Strana 70)

70 Chapter 4 Managing the Passport 8683POS Module

209564-A

b To assign the POS ports to the VLAN as static members, enter the ports in

the StaticMembers column.

c To assign all other ports to the VLAN as active members, enter the ports

in the ActiveMembers column.

d Enter the POS ports in the NotAllowToJoin column.

e Click Apply.

5 To disable bridging:

a Click the POS PPP tab.

b In the Bridge area, BridgeConfigAdminStatus field, click Close.

6 To enable IPX routing on each selected port:

a Click the POS PPP tab.

b In the IPX area, IpxcpAdminStatus field, click Open.

7 To enable the port on both Passport 8683POS Modules:

a Click the Interface tab.

b In the AdminStatus field, click Up.

8 Click Apply.

SubnetAddr IP subnet address of this VLAN. This value is meaningful only if

rcVlanType is equal to byIpSubnet(2). For other VLAN types it

should have the value 0.0.0.0.

SubnetMask IP subnet mask of this VLAN. This value is meaningful only if

rcVlanType is equal to byIpSubnet(2). For other VLAN types it

should have the value 0.0.0.0.

Table 15 Basic tab fields (continued)

Field Description

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 153 154

Žádné komentáře

Nortel Networks 8683POS Uživatelský manuál Strana 70