Nortel Networks 40M2420 Uživatelský manuál stáhnout pdf (Strana 22)

100

101

Alteon OS Command Reference

 Chapter 1: The Command Line Interface 40M2420, April 2007

Figure 1-1 Switch management on the BladeCenter management module

4. You can use the default IP addresses provided by the management module, or you can

assign a new IP address to the switch module through the management module. You can

assign this IP address through one of the following methods:

 Manually through the BladeCenter management module

 Automatically through the IBM Director Configuration Wizard (available in

Director release 4.21)

NOTE – If you change the IP address of the GbE Switch Module, make sure that the switch

module and the management module both reside on the same subnet.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 381 382

Komentáře k této Příručce

Žádné komentáře

Nortel Networks 40M2420 Uživatelský manuál Strana 22

Komentáře k této Příručce

Související produkty a manuály pro Software Nortel Networks 40M2420