Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Uživatelský manuál stáhnout pdf (Strana 71)

Chapter 4 Installing option cards and DIMMs 71

Nortel VPN Router Installation — VPN Router 2700

4 Attach the antistatic wrist strap that was shipped with the VPN Router 2700

(see “Attaching the antistatic wrist strap” on page 64).

5 To replace a DIMM, remove the installed DIMM as follows:

a Press down the locking lever on either side of the DIMM (Figure 26 on

page 72).

b Pull the DIMM up to remove it from the slot.

6 Press down the locking lever on either side of the slot where you plan to

install the new DIMM (Figure 26 on page 72).

7 Place the new or replacement DIMM in the slot (Figure 26 on page 72).

Use the alignment keys to properly position the DIMM in the slot.

8 Press the DIMM firmly into the socket.

9 Pull up the locking lever on either side of the DIMM to snap it into position.

Caution: Risk of equipment damage

Electrostatic discharge can damage VPN Router 2700 components.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 107 108

Žádné komentáře

Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Uživatelský manuál Strana 71