Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Uživatelský manuál Strana 84

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 108
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 83
84 Appendix A Technical specifications
NN46110-311 02.01
Figure 33 1000BASE-T (1000 GT) Ethernet interface card
Select cables for this card as follows. Keep in mind that this card is
auto-negotiating and uses the highest possible data rate:
For 1000BASE-T operation, use Category 5 four-pair Ethernet wiring. The
cable must comply with the TIA 568 wiring specification. Nortel recommends
a maximum length of 100 meters for the cable segment.
For 100BASE-TX operation, use Category 5 twisted-pair wiring: one pair
each for transmit and receive operations. The cable must comply with the
EIA 568 wiring specification. Nortel recommends a maximum length of 100
meters for the cable segment.
For 10BASE-T operation, use Category 3, 4, or 5 twisted-pair wiring.
The following table provides the pinouts for the 1000BASE-T (1000 GT) Ethernet
interface card..
Table 22 1000BASE-T (1000 GT) Ethernet pinouts
Pin Description
1TP0+
2TP0-
3TP1+
4TP2+
5TP2-
6TP1-
7TP3+
8TP3-
CS260010A
12345678
Zobrazit stránku 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 107 108

Komentáře k této Příručce

Žádné komentáře