Nortel-networks M3310 Uživatelský manuál Strana 78
- Strana / 264
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
78 Digital Telephone IP Adapter Installation and Administration Guide
Installing the Digital Telephone IP Adapter unit Standard 2.1
Complete the following procedure:
1 Choose the location on the wall where you want to mount the Digital
Telephone External IP Adapter unit.
2 Use the pre-drilled screw slots on the bottom of the Digital Telephone
External IP Adapter unit as a guide to measure and mark the location on
the wall for each mounting screw.
The measurements between the screw slots are as follows:
! from front to back panels: 2.54 cm (1 in.)
! from side to side: 15.8 cm (6.25 in.)
3 Mount the screws.
Note: Do not screw the screws all the way in. Stop when the heads are
about 5 mm (1/8 inch) from the wall.
4 Mount the Digital Telephone External IP Adapter unit on the screws, then
gently pull it down so the screws slide into the narrow portion of the screw
slots.
Note: Do not let go yet.
5 Make sure that the Digital Telephone External IP Adapter unit is securely
mounted.
.
WARNING
Risk of equipment damage
Ensure that you fasten the Digital Telephone External IP Adapter
unit securely to the wall. Falls can damage the unit.
- Digital Telephone IP Adapter 1
- Publication history 5
- Contents 7
- Planning for installation 55 8
- January 2005 Contents 9
- Configuration Manager 113 10
- 7 Administration 155 11
- 8 Troubleshooting 207 12
- A Planning forms 229 13
- Contents Standard 2.1 14
- About this document 15
- About this guide 16
- Product overview 17
- Skills you need 18
- Data networking knowledge 19
- Precautionary messages 20
- → Logon Unit → Telnet 20
- PBX terminology 21
- Related information products 22
- Product Introduction 26
- Reach Line Card 27
- Voice over IP technology 27
- ! telephone menu 28
- Hardware description 29
- Indicators 30
- Front view 30
- G101532IP 33
- ! cable modem 34
- Connection options 35
- External IP Adapter unit 36
- Digital Telephone Internal 36
- IP Adapter circuit card 36
- Outgoing call process 37
- Incoming call process 37
- Host-controlled call mode 37
- IP Adapter unit site 38
- Voice over IP network call 39
- Digital telephone 40
- System security 42
- Telephones 43
- Supported telephone modules 46
- Supported telephone features 47
- Supported Codecs 49
- Online/Offline Table 50
- Emergency service number 51
- Manager 52
- Power requirements 53
- Planning for installation 55
- Physical environment 56
- Specification Minimum Maximum 57
- Normal operation 57
- Power consumption 57
- Mounting options 58
- Administration PC 59
- Windows PC requirements 60
- Network considerations 62
- Network diagram 63
- Deployment 64
- IP deployment 65
- Adapter unit 67
- Preparing for installation 68
- Adapter circuit card 70
- Installing ferrite beads 73
- G101482IP 74
- Note: Do not let go yet 78
- Rear view 79
- ! RAM memory test 81
- ! Flash checksum validation 81
- ! Perform a syslog test 82
- Chapter 4 83
- Accessing the telephone menu 85
- Telephone menu key function 85
- Enter User Name 87
- Press the Rls key to exit 87
- Enter Password 87
- [1-Yes 2 - No] 90
- The telephone 91
- , similar to 91
- 2 hours, press 1, 2, and 91
- Modify Localization? 105
- [1-Yes 2-No] 105
- Modify Modem Tones? 105
- Chapter 5 113
- Before you begin 114
- → Save to Flash from the 117
- Enable PBX Alarms 119
- SPRE Codes: Online 119
- SPRE Codes: Offline 119
- SPRE Codes: Registration 119
- Field Description 119
- Addon Module Type 121
- IP configuration 122
- Configuring IP information 123
- IP Gateway 126
- DiffServ CodePoint 126
- DiffServ CodePoint: Value 127
- 802.1Q Mapping 128
- 802.1Q Mapping: VLAN ID 128
- 802.1Q Mapping: Priority 128
- RLC connection configuration 129
- → Save to Flash 130
- Auto upgrade configuration 133
- Configuring automatic upgrade 134
- ! Once a Day 135
- ! Once a Week 135
- ! Once a Month 135
- Frequency field) 136
- Syslog configuration 137
- IP Address 139
- Facility Indicator 139
- Using the digital telephone 141
- Modes of operation 142
- Placing and receiving calls 144
- Indicator updates 146
- Display messages 147
- Message Description 148
- Telephone features operation 150
- Call Transfer 151
- Going online and offline 152
- Administration 155
- 911x → Configuration Manager 156
- → Change Password → Local 157
- → Change Password → Node 158
- Creating the backup file 160
- → Download Config 160
- January 2005 Administration 161
- Restoring the configuration 162
- Administration Standard 2.1 164
- Display logs 167
- Telephone IP Adapter unit 169
- → Resize Logs 169
- Clear logs 170
- → Clear Logs 170
- Statistics screens 171
- Caller Information Statistics 174
- Ethernet Interface Statistics 181
- Collisions 185
- Statistic Description 185
- Network Statistics 186
- Tx Voice Samples 188
- Rx Voice Samples 188
- Rx Error 188
- Rx Dropped 189
- EthTx Mcast 189
- EthTX Ucast 189
- EthTx Disc 189
- → System Data 192
- Types of upgrades 193
- Downloading the upgrade file 193
- Performing a firmware upgrade 196
- → Upload S/W 198
- Digital Telephone 199
- IP Adapter unit 199
- 4 Click on the Next button 202
- Restarting the system 204
- Performing a software upgrade 206
- Troubleshooting 207
- Question 209
- Troubleshooting Standard 2.1 210
- Digital telephone set 211
- January 2005 Troubleshooting 213
- Network connectivity 217
- Symptom What to do 219
- Software problems 220
- Unsuccessful PING options 223
- Syslog testing 224
- Alarms and alerts 225
- United States 227
- Asia/Pacific 228
- Planning forms 229
- IP Adapter telephone menu— 232
- Configuration Values 232
- January 2005 Planning forms 233
- Planning forms Standard 2.1 234
- Connection pin-out tables 235
- RJ-45 Ethernet connector 236
- Power connector pin-out table 238
- Equipment attachment notice 239
- Industry Canada 240
- Appendix D 241
- Underwriters Laboratory (UL) 242
- Australia 242
- Electromagnetic compatibility 243
- Electromagnetic immunity 244
- Electrostatic discharge 245
- FCC requirements 246
- Party lines 247
- Fields Index 249
- Fields Index Standard 2.1 250
- January 2005 Fields Index 251
- Total Channels 179 252
- Numerics 253
- Index Standard 2.1 262
Související produkty a manuály pro Hardware Nortel-networks M3310
Hardware Nortel-networks NN46120-104 Uživatelský manuál
(300 stránky)
(300 stránky)
Hardware Nortel-networks WAG54G Uživatelský manuál
(100 stránky)
(100 stránky)
Hardware Nortel-networks CG030601 Uživatelský manuál
(14 stránky)
(14 stránky)
Hardware Nortel-networks BSG12aw Uživatelský manuál
(66 stránky)
(66 stránky)
Hardware Nortel-networks 312865-A Uživatelský manuál
(18 stránky)
(18 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce