Nortel Networks BCM200 Uživatelský manuál stáhnout pdf (Strana 190)

190 Chapter 15 Using Telset Administration to set the basic parameters

N0060612N0060612

To select the telephony startup template and start DN

You set the template and start DN using Feature **STARTUP from a two-line display telephone.

Refer to the BCM 4.0 Telset Administration Guide for information on using Telset Administration

to set this parameter.

Other telephony startup parameters are configured using Feature **CONFIG. Refer to the BCM

4.0 Telset Administration Guide for more information.

To initialize voice mail

You initialize your voice mail system using Feature 983 from a two-line display telephone.

Refer to the CallPilot Telephone Administation Guide for information on using Telset

Administration to initialize your voice mail system.

To create Telset user accounts

1 Select Feature 9*8 from a two-line display telephone.

2 Enter the following user ID and password:

User ID: SETNNA

Password: CONFIG

The numerical values of the user ID and password are 738662 and 266344, respectively.

3 Press NEXT to scroll through the menu and select User Accounts.

4 Press OK. The Accounts screen appears.

5 Press NEXT to scroll through the list of available accounts to create.

6 Press CHNGE to change the status of the current account.

7 Press CRT to create the account.

If you see the DEL command instead of the CRT command, then the account is already

created.

8 Press BACK. The Accounts screen appears.

9 Press NEXT. The password screen appears.

10 Press CHNGE to change the password.

11 Press NEXT to scroll through the list of available accounts.

Note: You can only set these parameters for only 15 minutes after system bootup.

Note: You can only create Telset accounts using Telset Administration. To

create Element Manager accounts, you must use Element Manager.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 381 382

Žádné komentáře

Nortel Networks BCM200 Uživatelský manuál Strana 190