Nortel Networks Server 1005r Uživatelský manuál Strana 114

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 206
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 113
Replacing basic chassis components Standard 1.10
114 CallPilot
Replacing a hard drive
Two hot-swappable SCSI drives are installed in your chassis. You do not
need to remove the chassis cover to add or replace a hot-swap hard drive,
but you must remove the front bezel to access the hard drives.
To replace a SCSI hard drive
1 Remove the front bezel. Refer to “Removing and replacing the front
bezel” on page 106 for instructions.
2 Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
3 Locate the faulty hard drive. Refer to the following diagram of the
front panel.
ATTENTION
The replacement hard drive must be the same size or larger
than the drive being replaced.
Zobrazit stránku 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 205 206

Komentáře k této Příručce

Žádné komentáře