Nortel Networks 10BASE-T Uživatelský manuál Strana 227

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 330
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 226
Using the Console Interface
309985-C Rev 00
3-85
Table 3-31 describes the
ATM Configuration Menu screen options.
LEC Configuration
The LEC Configuration screen (Figure 3-36
) allows you to specify parameters
and port assignments for the LEC virtual ports.
When you configure your LEC virtual ports, you must also use the VLAN
Configuration screen to assign the specified LEC to a current VLAN or to a new
VLAN (see
VLAN Configuration on page 3-41).
You can assign the LEC virtual ports to either one of the two physical ports
(A1 or A2).
Choose LEC Configuration (or press l) from the ATM Configuration Menu screen
to open the LEC Configuration screen.
Table 3-31. ATM Configuration Menu Screen Options
Option Description
LEC Configuration...
Displays the LEC Configuration screen (see
LEC Configuration on
page 3-85
). This screen allows you to specify parameters and port
assignments for the LEC virtual ports.
ATM MDA Configuration...
Displays the ATM MDA Configuration screen (see
ATM MDA Configuration
on page 3-88
). This screen allows you to set up and view ATM configuration
parameters for the ATM MDA.
MDA Software
Download...
Displays the MDA Software Download screen (see
ATM MDA Software
Download on page 3-91). This screen allows you to upgrade your ATM MDA
with the latest firmware code.
Return to Switch
Configuration Menu
Exits the ATM Configuration Menu screen and displays the Switch
Configuration Menu screen.
Zobrazit stránku 226
1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 329 330

Komentáře k této Příručce

Žádné komentáře